///Robot swivel leaks or is stiff
Robot waterjet
Robot swivel leaks or is stiff
Swivels on the robot wrist must turn freely.
Safety first: Switch off the pump, release all pressure (open the on/off valve or bleed-down valve) and lock out before you open any high-pressure part. Never put a hand or tool near a running jet.
1Check the causes, most likely first
0 of 1 checked
01Worn swivel seals or bearing
Most likely
Wear leaks and loads the arm.
How to check: Rebuild the swivel.
| Photo | Art. no. | Description | Excl. VAT | |
|---|---|---|---|---|
 | 10629 | Thrust Needle Bearing Swivel, 10084713
StemKMT |
€ 4.80 | |
 | 10630 | Thrust Washer Swivel, 10094647
Fitting & adapterKMT |
€ 4.20 | |
 | 10631 | Spindle Swivel, 1/4'' Female, 91960021
Fitting & adapterKMT |
€ 258.00 | |
 | 10632 | Cap Assembly, Swivel, 91959643
AssemblyKMT |
€ 93.60 | |
 | 10649 | Body Swivel Joint 1/4 90°, 91959635
Valve bodyKMT |
€ 418.80 |
Related problems
General advice based on manufacturer manuals and service practice. Always follow the manual of your machine. Not sure? .