///Abrasive hose wears through
Abrasive feed
Abrasive hose wears through
Abrasive wears hoses at tight bends.
Safety first: Switch off the pump, release all pressure (open the on/off valve or bleed-down valve) and lock out before you open any high-pressure part. Never put a hand or tool near a running jet.
1Check the causes, most likely first
0 of 1 checked
01Tight bends
Most likely
Abrasive cuts through the outside of a bend.
How to check: Route the hose with large bends.
| Photo | Art. no. | Description | Excl. VAT | |
|---|---|---|---|---|
 | 11947 | Abrasive feed tube, 05076989
TubeKMT |
€ 43.20 | |
 | 12350 | Metering disks FLOW sandfeeder, 009931-1
Bushing & ringFlow |
€ 130.80 | |
 | 12555 | Metering Valve Rubber Stopper, A-11073
Bushing & ringFlow |
€ 5.00 | |
 | 11312 | Abrasive Filter, 7001300
FilterBystronic |
€ 20.40 | |
 | 11209 | 1/4" Conduit, Sheathing Protective extra flexible, 20422988
|
€ 6.06 |
Related problems
General advice based on manufacturer manuals and service practice. Always follow the manual of your machine. Not sure? .